Get the job done fast with this no-sand, fast-drying two-part varnish.Fast and easy to use Bristol wood finish does not require sanding between coats and only needs about one hourdrying time between coats so you can quickly finish your project and get out on the water and enjoy yourself!The formulation can be applied "wet on wet" with no sanding required between coats. Resistance to UV light andabrasion far exceeds that of conventional varnish with durability of up to four years in northern latitudes andup to two years in the south.Key featuresLow maintenance alternative to traditional spar varnishPremium wood coating systemCan be used as a stand alone applicationSystem kit can be applied "wet on wet" with no sanding requiredSpecificationsRecommended Usage: Interior and exterior use; Above the waterline use onlyFormulation: Two-part urethaneAdditives: UV agents and inhibitorsApplication Methods: Brush, roller, sprayDrying Time: To overcoat: Approx. 1hr.; To full cure: 24-36hrs.Number of Coats Recommended: Six coats minimum over bare woodColor: Translucent amberCoverage: 200sq.ft./qt.