This versatile epoxy primer prevents corrosion in metals and osmotic blistering in fiberglass hulls.A heavy-duty, two-component, epoxy coating formulated to reduce water absorption, Pettit Protect is an excellentchoice for osmotic blister prevention and repair. The high-solids formula allows for quicker and easierapplication with fewer coats necessary for effective protection. It also offers dependable corrosion protectionon all underwater metals. Two-part kit makes one gallon.Key featuresReduces water absorption in fiberglass hulls and prevents osmotic blisteringHigh film build for maximum protection with fewer coatsExceptional protection for steel, aluminum, and other metalsHigh Performance System for Underwater Running GearPhysical dataType: Epoxy/PolyamideFinish: Low LusterComponents:2Curing mechanism: Chemical cureSolids by weight: 71 ± 2%Solids By volume: 56 ± 2%Coverage: 225 sq. ft/gal.VOC: 337 Grams/literFlash point: 80FApplicationApplication Method: Brush, Roller, Airless or Conventional SprayNumber of coats:3 minimumDry film thickness: 4 milsApplication tempature:50 F. Min. - 90 F. MaxThinner: 97 Epoxy ThinnerDrying Times* (Hours) Drying @50F @70F @90F To recoat 6 hr. 3 hr. 2 hr. To launch 120 hr. 72 hr. 48 hr. More informationFor detailed application instructions see the Pettit Protect Data Sheet. NOTE:Manufacturer data sheets aresubject to revision. Linked data sheets are believed to be accurate at the time of publication.